EFFECTS AND CHARACTERİSTİCS OF SETTLEMENTS ON OPERATİON

Abstract

Residential areas include areas where cities, towns, villages, and industrial facilities are concentrated. Despite the improved mobility of units in the area, the need for road networks for units that are not mechanized or provide combat service support has not been eliminated. Residential areas are important areas within the battlefield if they include road networks or important industrial facilities that pass through them.

References

1. “Temporary combat instructions on the operation of the tank and mechanized brigade in the Azerbaijani Army” (KKT 194-5). Baku: Military Publishing House, 2021 – 245 pages.
2. “Temporary combat instructions on the operation of the army and corps (large military units) in the Azerbaijani Army” (KKT 194-5). Baku: Military Publishing House, 2021 – 192 pages.
3. Ministry of National Defense Land Forces Command Training and Doctrine Command. KKT 31-50 (B) “Battle in Residential Areas (Applicable Draft)” named training manual. K.K. Printing House Directorate, 2020.
4. Ministry of National Defense Land Forces Command Training and Doctrine Command. KKT 31-50 (A) "Draft training manual named Battle in Meskûn Mahallerde Muharabe (2007 edition)".
5. General Staff, Land Forces Command, Ankara. KKT 31-50 "Instruction on Combat in Residential Areas".
6. K.K. Printing and Printed Document Depot Directorate.
7. N. M. Rasulov, et. al. (2022) Improving the efficiency of thread rolling with management of technological connections // SOCAR Proceedings. Special Iss. 1 011-015. DOI: 10.5510/OGP2022SI100694. https://proceedings.socar.az/en/journal/85
8. N.M. Rasulov, U.M. Nadirov, M. Z. Alakbarov. (2022) Improving the efficiency of grinding teeth by copying with the control of dynamic technological connections. / SOCAR Proceedings. Special Issue 1 029-035. DOI: 10.5510/OGP2022SI100697. https://proceedings.socar.az/en/journal/85
9. Nariman Rasulov, et. al. (2025) "Issues of Increasing the Efficiency of Cylindrical Gear Grinding Using Copying Methods Through a Systematic Approach" Reliability: Theory & Applications, vol. 20, no. SI 7 (83), pp. 259-266. https://doi.org/10.24412/1932-2321-2025-783-259-266
10. Rasulov N.M., Mammadov A.S., Alakbarov M.Z. (2024) Indirect improvement of the efficiency of gear grinding by the copying method based on system analysis. Azerbaijan State Maritime Academy, Scientific Works, No. 2, pp. 70–76.
11. Rasulov N.M., Alakbarov M.Z. (2025) Direct improvement of the efficiency of gear grinding by the copying method based on system analysis. Azerbaijan Technical University, Scientific Works, No. 1, 2025, pp. 67–72.
12. Nariman Rasulov, et. al. (2024) The issues of improving surface quality and productivity in the ginding with copy method of shaped and tooth surfaces. IntechOpen - Open Access books “Advances in Materials Processing - Recent Trends and Applications in Welding, Grinding, and Surface Treatment Processes”, pp. 103-122, London, DOI: 10.5772/intechopen.1004849. https://www.intechopen.com/chapters/1180557
13. Nariman Rasulov, et. al. (2024) Increasing the Efficiency of Forming Complex Rotating Surfaces with the Controlling of Technological Connections // Key Engineering Materials. – Trans Tech Publications Ltd, Switzerland. – ISSN: 1662-9795. – Vol. 979. – pp. 55–62. – DOI: 10.4028/p-t6EtmD. – 23574. https://doi:10.4028/p-jc7OVU