ECONOMIC EFFICIENCY OF INCREASING THE EFFECTIVENESS OF GEAR PROFILE GRINDING BY COPYING

Abstract

References

1. Kane M.M., Suslov A.G. et. al.; under the general editorship of Dr. Sci. (Eng.) M.M. Kane. Quality Management in Mechanical Engineering: Textbook. – Moscow: Mashinostroenie, 2010. – 416 p.
2. Rasulov, N. M., Nadirov, U. M., & Guseinov, G. R. (2013). On the quality of manufacturing products and their durability. In Modern Methods and Technologies for Creating and Processing Materials (Book 2: Technology and Equipment of Mechanical and Physico-Technical Processing, pp. 434–443). Minsk: Physical-Technical Institute of the National Academy of Sciences of Belarus. ISBN 978-985-6441-35-9.
3. Rasulov, N. M., Nadirov, U. M., & Guseynov, G. R. (2014). Relations between production and operating indicators of products quality. Vestnik Mashinostroyeniya, 11, 85–88.
4. Starzhinsky V.E., Kane M.M., eds. Production technology and methods for ensuring the quality of gears and gears. St. Petersburg, Profession, 2007. 832 p.
5. Stephen P. Radzevich. Handbook of Practical GearDesign and Manufacture. Taylor & Francis Group, LLC.2012, - 846 p.
6. Abdullaev, A. I. (2022). Switch Electromechanical Drive for Railways. Eurasian Patent No. 040109. Eurasian Patent Office. Apr. 21, 2022.
7. Abdullayev, A. H., Khalilov, I. A., & Rasulov, G. N. (2025). Design and Production Technology of Special Friction Clutch Inside Innovative Reducers of Railroad Switches. Reliability: Theory & Applications, 20(Special Issue 7(83)), 420–427.
8. Rasulov, N., Nadirov, U., & Abbasova, I. (2024). Improving the Machining Efficiency of Threads and Conical Surfaces of Different Directions by Managing Static Technological Relationships. Advances in Science and Technology, 148, 97–102. ISSN 1662-0356.
9. Rikard Hjelm, et. al. (2023) A multi-perspective method for gear efficiency and contact analysis. Results in Engineering Vol. 20, 101582.
10. Khankishiyev, I., Mamedov, E. D., & Huseynov, Y. (2026). Analysis of Literary Sources on the Reliability and Durability of Ship Machines and Mechanisms Operating under Extreme Conditions. In Scientific Forum: Theory and Practice of Research: Proceedings of the XI International Scientific and Theoretical Conference (San Francisco, USA, March 13, 2026) (pp. 156–164). San Francisco, CA: International Center of Scientific Research. DOI: 10.36074/scientia-13.03.2026.
11. Abdullaev, A. I., Rasulov, G. N., Huseynov, I. D., & Ismayilov, O. F. (2022). Innovative Reducer for Railroad Switch Drives and Evaluation of Friction Work on Double Sliding Bearings. SOCAR Proceedings, Special Issue 1, 1–6. https://doi.org/10.5510/OGP2022SI100700
12. Alakbarov, F. (2026). Effects and Characteristics of Settlements on Operation. In Modern Tools and Methods of Scientific Investigations: Proceedings of the VII International Scientific and Theoretical Conference (pp. 106–115). Antwerp, Belgium.
13. Alakbarov, F. (2025). Fundamentals of Planning Operations at the Strategic, Operational and Tactical Levels in the Military Decision-Making Process. Military Knowledge, No. 1, 17–25. https://doi.org/10.30546/mk.2024.4.0130
14. Alakbarov, F. (2022). Characteristics of the Employment of Tactical Airborne Forces in Armed Conflicts. Military Knowledge, No. 4, 15–20.
15. Alakbarov, F. (2023). Factors Influencing the Military Decision-Making Process. Military Knowledge, No. 2, 46–53.
16. Abdullayev, A. I., Rasulov, G. N., & Ismayilov, O. F. (2020). Mathematical Modeling of Angular Difference Between Teeth Direction in the Zone of Engagement and Contact Ratio in Gears. Scientific and Technical Journal of Information Technologies, Mechanics and Optics, 20(1), 110–117. https://doi.org/10.17586/2226-1494-2020-20-1-110-117
17. Abdullayev, A. H., & Rasulov, G. N. (2020). Design Optimization of Multi-Stage Cylindrical Reducers in Accordance with the Gear Ratios. In Proceedings of the 7th International Conference on Control and Optimization with Industrial Applications (COIA) (Vol. II, pp. 20–23). Baku, Azerbaijan.
18. Abbasov, V., et al. (2024). Formation of Shaft Accuracy During Mechanical Processing on CNC Machines. Advances in Science and Technology, 148, 81–86.
19. Aziz, S. Sh. (2020). Kinematic Features of the Lapping Process and Determination of Its Basic Parameters. Computational Nanotechnology, 7(3), 11–16.
20. Aziz, S. Sh. (2025). The General Regularity of Surface Layer Work Hardening in the Honing Operation of Medium Carbon Steels. Reliability: Theory & Applications, 20(Special Issue 7(83)), 372–378.
21. Douglas C. Montgomery. Introduction to statistical quality control 7th edition. 2013 by John Wiley & Sons, Inc. ISBN: 978-1-118-14681-1.
22. Yusubov, N., & Abbasova, H. (2021). Full-Factor Matrix Model of Accuracy of Dimensions Performed on Multi-Purpose CNC Machines. Obrabotka Metallov (Metal Working and Material Science), 23(4), 6–20. https://doi.org/10.17212/1994-6309-2021-23.4-6-20-20
23. Yusubov, N., Abbasova, H., & Khankishiyev, I. (2021). Entwicklung einer Projektierungstheorie für die Mehrwerkzeugbearbeitung mit den Möglichkeiten der modernen CNC-Werkzeugmaschinen. Forschung im Ingenieurwesen, 85, 661–678. https://doi.org/10.1007/s10010-021-00535-2
24. Yusubov N.D., Movlazade V.Z., Abbasova H.M. (2022) Accuracy Models of Machining in Multi-Tool Adjustments. Proceedings of the 8th International Conference on Control and Optimization with Industrial Applications (COIA 2022), Vol. 2, pp. 477–479.
25. Yusubov N.D., Abbasova H.M. (2018) The basic principles of the mechanism for the formation of scattering areas in the two-carriage adjustments. Machine science, vol. 7, No1, pp. 57-61.
26. Simon, S., Yusubov, N. D., Amirli, S. F., & Amirov, F. G. (2025). Hardness of Surface Layers of Blanks Made of Chromium–Nickel Alloys at Hydroabrasive Machining. Vestnik Mashinostroyeniya, 104(10), 873–877. https://doi.org/10.36652/0042-4633-2025-104-10-873-877
27. Hasanov, Y. N., Aziz, S., & Agayev, A. (2026). Analysis of the Technological Characteristics of the Honing Operation of 32CrMoV12-10 Steel Used under Severe Friction Conditions. In Scientia: Collection of Scientific Papers with the Proceedings of the X International Scientific and Theoretical Conference "Current Issues of Science, Prospects and Challenges" (Sydney, Australia, pp. 88–97).
28. Yusubov, N., Abbasova, H., & Dadashov, R. (2025). Matrix Model of Accuracy in Machining Conical Surfaces on CNC Lathes. Reliability: Theory & Applications, 20(7), 393–400.
29. Yusubov, N. D., & Abbasova, H. M. (2020). Models for Machining Accuracy in Multi-Tool Adjustment. International Journal of Automotive and Mechanical Engineering, 17(3), 8067–8085.
30. Yusubov N.D. ( 2013) Matrix Models of Processing Accuracy in Multitool Turning. Mechanical Engineering Technology, no.1, pp. 57-63.
31. Yusubov N.D. et. al. (2023) Matrix models of machining errors in multi-tool multi carriage adjustments. International Journal on Technical and Physical Problems of Engineering (IJTPE), 15(3), pp. 309–315.
32. Yusubov N.D., Abbasova H.M. (2017) The fundamental principles of the mechanism for forming the scatter field of dimensions in dual-support setups. Proceedings of the 2nd International Scientific and Technical Conference "Problems of Metallurgy and Materials Science", pp. 375-380.
33. Yusubov N.D., Abbasova H.M. (2018) Generalized Segmented-Matrix Model of Multi-Tool Machining Accuracy. Scientific works, No 4, pp. 16-22.
34. Yusubov N., Abbasova H., Dadashov R. (2026) Full factorial model of dimensional distortion in multi-tool dualcarriage setups. Scientia: Collection of Scientific Papers with the Proceedings of the X International Scientific and Theoretical Conference “Current Issues of Science, Prospects and Challenges ”, Sydney, Australia, pp. 127–136.
35. Yusubov N.D. (2013) Fundamentals of matrix theory of accuracy of multi-tool turning. (Principles and structure of the theory, design and management of multi-tool machining processes). A V Akademikerverlag Gmbh & Co. KG / LAP LAMBERT Academic Publishing, Saarbrücken.
36. Yusubov N.D. (2008) Matrix full-factor model of dimensional distortions in multi-tool setups. Mechanical Engineering Technology, No 1, pp. 36-39.
37. Yusubov N.D., Abbasova H.M. (2019) Full Factorial Models of Dimensional Accuracy of Multi Tool Machining on Automatic Turning Machines. Bulletin of the South Ural State University. Ser. Mechanical Engineering Industry, vol. 19, no. 1, pp. 56–67.
38. Yusubov N., Abbasova H., Dadashov R. ( 2025) Matrix Model of Accuracy in Machining Conical Surfaces on CNC Lathes, Reliability Theory and Applications, Vol. 20, Iss. 7, pp. 393-400.
39. Yusubov N.D. (2008) Algorithmization of analytical model of dimensions stray field, executed in multi-tool multi-carriage adjustments. Bulletin of Mechanical Engineering, No 2, pp. 54-56.
40. Yusubov, N. D. (2009). Matrix Models of Accuracy in Multi-Tool Two-Support Setup. Russian Engineering Research, 29(3), 268–271. https://doi.org/10.3103/S1068798X09030125
41. Abbasov, V., Amirov, F., & Karimov, A. (2025). Wear Properties of Camshaft Cams and Improvement of Their Wear Resistance. Reliability: Theory & Applications, 20(Special Issue 7(83)), 297–303.
42. Abbasov, V., Amirov, F., & Karimov, A. (2024). Features of the New Design of the Camshaft of Internal Combustion Engines. In Proceedings of the International Symposium on Unmanned Systems and the Defense Industry (pp. 282–288). Cham: Springer Nature Switzerland.
43. Saidmakhamadov, N., et al. (2022). Development of Technology for Obtaining Quality Castings from Steel Alloys. Eurasian Journal of Engineering and Technology, 5, 135–138.
44. Turakhodjaev, N. D., Saidmakhamadov, N. M., Zokirov, R. S., Odilov, F. U., & Tashkhodjaeva, K. U. ( 2020). Analysis of Defects in White Cast Iron. Theoretical & Applied Science, 6, 675–682.
45. Turakhodjaev, N., Saidmakhamadov, N., Turakhujaeva, S., Akramov, M., Turakhujaeva, A., & Turakhodjaeva, F. (2020). Effect of the Metal Crystallization Period on Product Quality. Theoretical & Applied Science, 11, 23–31.
46. Aziz, S. Sh., Jafarli, G., & Sivanesan, S. (2025). Increasing Processing Efficiency in Fine Finishing Technology of Internal Cylindrical Surfaces by Technological Methods. Reliability: Theory & Applications, 20(Special Issue 10(88)), 307–314.
47. Aziz, S. Sh. ( 2024). Improving Surface Quality in Flat Grinding Operations Using Modern Technological Methods. Machine Science, 13(2), 59–64.
48. Frumusanu, G.R.; Bordeanu, M.; Susac, F. (2024) Method for Increasing the Energy Efficiency of the Gear Teeth Cutting Process by Smoothing the Cutting Force Variation. Appl. Sci. 14(21), 9751.
49. Rasulov, N. M., Nadirov, U. M., & Amiraslanov, P. A. (1995). O tochnosti po diametru narezannykh spetsial'nym dolbyakom zubchatykh poverkhnostei [On the Diameter Accuracy of Gear Surfaces Cut with a Special Gear Shaper Cutter]. Uchenye Zapiski Azerbaijan State Oil Academy, No. 1, 60–64. Rasulov, N. M., et al. (2022). Improving the Efficiency of Thread Rolling by Managing Technological Connections. SOCAR Proceedings, Special Issue 1, 11–15. https://doi.org/10.5510/OGP2022SI100694
50. T.N. Ivanova, et al. (2018) Research of grinding process of gears with involute profile to increase its efficiency. IOP Conf. Series: Materials Science and Engineering 327, 042046.
51. Dadashov R.Y., Yusubov N.D., Abbasova H.M. (2023) Modeli sil rezaniya pri mekhanicheskoy obrabotke na sovremennykh stankakh tokarnoy gruppy (Models of Cutting Forces During Mechanical Machining on Modern Machines of Turning Group). Proceedings of the All-Russian Forum of Young Researchers – 2023, pp. 236–246.
52. Yusubov N., Abbasova H. (2023) Model of Machining Process Control on Multi-Tool Single-Carriage Adjustments. Machine Science, Vol. 1, No. 1, pp. 22–27.
53. Yusubov, N., & Abbasova, H. (2024). Models of Cutting Forces in the Matrix Theory of Multi-Tool Machining Accuracy. Key Engineering Materials, 979, 27–38. https://doi.org/10.4028/p-bW48Sb
54. Yusubov, N., Abbasova, H., & Dadashov, R. ( 2023). Theoretical Basis for the Development of a Unified Algorithmic Complex of Mathematical Models of Cutting Forces. Machine Science, 1(1), 55–60.
55. Shipulin, L. V., Yusubov, N. D., & Frolov, A. A. (2023). Study of the Microrelief Obtained During Single Abrasive Grain Cutting. In A. A. Radionov & V. R. Gasiyarov (Eds.), Proceedings of the 8th International Conference on Industrial Engineering (ICIE 2022). Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-031-14125-6_68
56. Abdullaev, A. I., Najafov, A. M., Ahmedov, B. B., Chelebi, I. G., Abdullaev, A. A., & Hajiyev, A. B. (2022). Mechanical Drive of Sucker-Rod Pumping Unit. Eurasian Patent No. 039650. Eurasian Patent Office.
57. Tukhtaboev, I., Saidmakhamadov, N., Yusubov, N., Rasulov, N., & Toshpulatov, O. (2026). Improvement of the Technology for Producing High-Quality Castings Through Out-of-Furnace Treatment of Molten Metal. American Innovator: Journal of Emerging Technologies and Research, 1(2).
58. Nadirov, U. M., & Rasulov, N. M. (2019). Analysis and Mathematical Model of the Circumferential Accuracy of the Groove Cut on the Surface of Rotation. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 41(9), 481.
59. Rasulov, N. M., & Shabiyev, E. T. (2016). Instability of Cutting Depth When Grinding Gear Wheel Teeth by the Copying Method. Proceedings of Higher Educational Institutions. Machine Building, 12(681), 79–86.
60. Rasulov, N. M., & Shabiyev, E. T. (2014). Depth of Cut in Grinding Gear Teeth by the Copying Method. In Advanced Technologies and Systems of Mechanical Engineering: International Collection of Scientific Papers, 2(48), 76–81. Donetsk: Donetsk National Technical University.
61. Rasulov, N. M., Mammadov, A. S., & Shabiyev, E. T. (2016). Change in the Cutting Depth of Gear Teeth During Grinding by the Copying Method under Stable Conditions. Eastern European Scientific Journal, 11(2), 61–66.
62. Rasulov, N. M. ( 2003). Management of Technological Dimensional Relationships and Processing Efficiency of Machine Parts. Engineering, 3, 18–22.
63. Rasulov, N. M., et al. (2020). Advanced Technology for Machining Tapered Threads of Pipe Couplings. American Journal of Engineering and Technology Management, 5(2), 35–40.
64. Rasulov, N. M., & Nadirov, U. M. (2024). Ensuring the Quality of Taper Pipe Threads Rolled on Pipes Through Control of Kinematic Technological Connections. Russian Engineering Research, 44(1), 20–22.
65. Simon, S., Yusubov, N., & Amirli, S. ( 2024). Formation of geometric parameters of the surfaces of cylindrical parts during waterjet cutting. Advances in Science and Technology, 148, 59–64.
66. Rasulov, N. M., et al. (2022). Improving the Efficiency of Thread Rolling by Managing Technological Connections. SOCAR Proceedings, Special Issue 1, 11–15. https://doi.org/10.5510/OGP2022SI100694
67. Rasulov, N. M., Nadirov, U. M., & Alekberov, M. Z. (2020). Generalized Assessment of Machined Surface Quality. Russian Engineering Research, 40(10), 822–825. https://doi.org/10.3103/S1068798X20100202
68. Rasulov, N., et al. (2025). Issues of Increasing the Efficiency of Cylindrical Gear Grinding Using Copying Methods Through a Systematic Approach. Reliability: Theory & Applications, 20(Special Issue 7(83)), 259–266. https://doi.org/10.24412/1932-2321-2025-783-259-266
69. Rasulov, N., & Alakbarov, M. (2026). Systematic Investigation of the Contact Surface Relationships Between the Workpiece and Tool in Gear Grinding by the Copying Method. In Proceedings of the International Scientific and Scientific-Technical Conference "Digital Machining: Automation, Intelligent Systems, Trends, Problems and Solutions" (Vol. 1, No. 2, pp. 471–472). Tashkent, Uzbekistan, 3 June 2026.
70. Rasulov, N. M., Mammadov, A. S., & Alakbarov, M. Z. (2024). Indirect Improvement of the Efficiency of Gear Grinding by the Copying Method Based on System Analysis. Scientific Works of the Azerbaijan State Maritime Academy, 2, 70–76.
71. Rasulov, N. M., & Alakbarov, M. Z. (2025). Direct Improvement of the Efficiency of Gear Grinding by the Copying Method Based on System Analysis. Scientific Works of Azerbaijan Technical University, 1, 67–72.
72. Rasulov, N., Alakbarov, M., & Saidmakhamadov, N. (2026). Indirect Improvement of Gear Grinding Efficiency Based on a Systematic Approach Through Material Quality Control. In Proceedings of the International Scientific and Technical Conference "Modern Technical Education: Innovative Approaches and Training of Intellectual Engineers" (pp. 23–28). Namangan State Technical University, Namangan, Uzbekistan, 29–30 June 2026.
73. Rasulov, N. M., Nadirov, U. M., & Alakbarov, M. Z. ( 2022). Improving the Efficiency of Gear Grinding by the Copying Method Through Control of Dynamic Technological Connections. SOCAR Proceedings, Special Issue 1, 29–35. https://doi.org/10.5510/OGP2022SI100697
74. Rasulov, N., Shabiyev, E., Damirova, G., Alakbarov, M., & Huseynov, Y. (2024). Increasing the Efficiency of Forming Complex Rotating Surfaces Through Control of Technological Connections. Key Engineering Materials, 979, 55–62. https://doi.org/10.4028/p-jc7OVU
75. Rasulov, N. M., Alekberov, M. Z., & Nadirov, U. M. (2021). More Efficient Copy Grinding of Complex Surfaces. Russian Engineering Research, 41(9), 829–831. https://doi.org/10.3103/S1068798X21090227
76. Rasulov, N. M., et al. (2021). Increasing the Efficiency of Grinding Shaped Surfaces by the Copying Method. Scientific Proceedings of the Azerbaijan National Academy of Sciences, 23(3), 22–31.
77. Rasulov, N., Alakbarov, M., & Shabiyev, E. (2026). Issues of Increasing the Efficiency of Gear Grinding by the Copying Method. In Proceedings of the VI International Scientific and Theoretical Conference "Scientific Review of the Actual Events, Achievements and Problems" (pp. 103–112). Berlin, Germany, 27 March 2026.
78. Rasulov, N., et al. (2024). The Issues of Improving Surface Quality and Productivity in the Grinding with Copy Method of Shaped and Tooth Surfaces. In Advances in Materials Processing: Recent Trends and Applications in Welding, Grinding, and Surface Treatment Processes (pp. 103–122). IntechOpen. https://doi.org/10.5772/intechopen.1004849
79. Rasulov, N. M., & Alakbarov, M. Z. (2021). Mathematical Model of the Actual Cutting Depth in Tooth Grinding by the Copying Method and Investigation of Surface Quality. In Machine-Building and Energy: New Concepts and Technologies: Proceedings of the International Scientific and Practical Conference (pp. 27–29). Baku: Azerbaijan Technical University.
80. Rasulov, N., & Alakbarov, M. (2026). Issues of Ensuring the Efficiency of Gear Grinding by the Copying Method. In Proceedings of the International Scientific and Scientific-Technical Conference "Digital Machining: Automation, Intelligent Systems, Trends, Problems and Solutions" (Vol. 1, No. 2, pp. 76–77). Tashkent, Uzbekistan, 3 June 2026.
81. Rasulov, N. M., Shabiyev, E. T., & Alakbarov, M. Z. (2019). Linkages Between Cutting Depth and Prisongrinding the Tooth of Gear Wheels by Method of Copying. In Modern Methods and Technologies for Creating and Processing Materials: Collection of Scientific Papers (pp. 280–286). Minsk: Physical-Technical Institute of the National Academy of Sciences of Belarus.
82. Rasulov, N. M., Mammadov, A. S., & Alakbarov, M. Z. (2018). Formation of Allowance When the Grinding the Teeth by the Copying Method. International Journal of Engineering Sciences & Research T echnology, 7(10), 1–5.
83. Rasulov, N. M., & Alakbarov, M. Z. (2020). Mathematical Models of the Components of Machining Allowance for Grinding the Teeth of Cylindrical Gears. Mechanical Engineering, 1, 47–52. Azerbaijan Technical University. ISSN 2227-6912.
84. Rasulov, N. M., & Alakbarov, M. Z. (2025). Mathematical Model for Stabilizing the Cutting Depth Along the Profile in Grinding Involute-Shaped Profiles. In Proceedings of the 1st International Scientific Conference "Innovation and Sustainable Development: New Ideas and Solutions" (pp. 554–562). Nakhchivan, Azerbaijan: Nakhchivan State University.
85. Alakbarov, M. Z. (2021). Increasing the Efficiency of Grinding Shaped Surfaces by the Copying Method. Proceedings of Azerbaijan State Marine Academy, 1, 11–16.
86. Alakbarov, M. Z. (2021). Investigation of the Actual Cutting Depth in Grinding Involute Profiles of Cylindrical Gears by the Copying Method. In Proceedings of the XV International Scientific Symposium "Intercultural Relations in the Modern World" (pp. 265–269). Tehran, Iran.
87. Alakbarov, M. Z. (2021). Investigation of the Effect of Cutting Depth on Surface Quality in Copy Grinding of Shaped Surfaces. Scientific Proceedings of Azerbaijan Technical University. Mechanical Engineering, 1, 49–53.
88. Alakbarov, M. Z. (2020). Analysis of the Conditions for Forming the Working Surfaces of Gear Teeth During Copy Grinding. In Proceedings of the XXXIV International Scientific and Practical Conference "Russian Science in the Modern World" (pp. 47–49). Moscow, Russia, November 2020.
89. Rasulov, N. M., Alakbarov, M. Z., & Mammadov, A. S. (2023). Method for Grinding Shaped Surfaces by the Copying Method. Azerbaijan Patent No. I 2023 0035. Intellectual Property Agency of the Republic of Azerbaijan.
90. Rasulov, N. M., & Alakbarov, M. Z. (2021). Mathematical Model of the Actual Cutting Depth in Gear Tooth Grinding by the Copy ing Method and Investigation of Surface Quality. In Proceedings of the 1st International Scientific and Practical Conference "Machine-Building and Energy: New Concepts and Technologies" (pp. 27–29). Baku, Azerbaijan: Azerbaijan Technical University.